Mikrotik:Bandwidth scheduling

The Limit of Different Bandwidth In Day and Night will be manged by Mikrotik according to your
requirement .As you have seen there are most of the person are configuring their bandwidth
scheduling on various types .

There are lot many ways to limit bandwidth for day and Night, but personally I found this is the easiest way, Here it is.

I have used Simple Queue, Script and Scheduler.

Suppose we have one network 192.168.20.0/24 and want to limit Bandwidth for day and Night Time.

My LAN Network 192.168.20.0/24

Bandwidth = 06:00am – 18:00pm – 1Mbps. <Max-Limit>
Bandwidth = 18:00pm – 06:00am – 2Mbps. <Max-Limit>

Create two simple queues for the same network with different Bandwidth Limit.

/queue simple
#name=”Day” target-addresses=192.168.20.0/24 dst-address=0.0.0.0/0
interface=<ether-x> parent=none direction=both priority=8
queue=default-small/default-small limit-at=512k/512k
max-limit=1M/1M total-queue=default-small

#name=”Night” target-addresses=192.168.20.0/24 dst-address=0.0.0.0/0
interface=<ether-x> parent=none direction=both priority=8
queue=default-small/default-small limit-at=1M/1M
max-limit=2M/2M total-queue=default-small
Now, write scripts

/system script
#name=”Day” source=/queue simple enable Day; /queue simple disable Night
#name=”Night” source=/queue simple enable Night; /queue simple disable Day
Finally, Schedule it

/system scheduler
#name=”Day” on-event=Day start-date=oct/13/2007 start-time=06:00:00 interval=1d
#name=”Night” on-event=Night start-date=oct/13/2007 start-time=18:00:00 interval=1d


The configuration is simple and based on your requirement you can make change the rule little bit .But here I am not making it different any way and the way of configuration will be same as above .