Please find the below steps .
My LAN interface is ETH-6 in this router and all my lan PC's are connected from port number
6 and all my users should get the IP address through DHCP in my LAN .
Let's start the configuration .
Step-1
Create one IP pool in mikrotik from where the mikrotik will provide the IP address to all the users .
Step-2
Create the DHCP server to provide the IP address to the users .And before you create the DHCP server you have to configure the gateway IP address in ETH-6 interface(According to my requirement.)
NOTE-
DHCP lease time:-
The time that a client may use the assigned address. The client will try to renew this address after a half of this time and will request a new address after time limit expires.
My LAN interface is ETH-6 in this router and all my lan PC's are connected from port number
6 and all my users should get the IP address through DHCP in my LAN .
Let's start the configuration .
Step-1
Create one IP pool in mikrotik from where the mikrotik will provide the IP address to all the users .
Step-2
Create the DHCP server to provide the IP address to the users .And before you create the DHCP server you have to configure the gateway IP address in ETH-6 interface(According to my requirement.)
NOTE-
DHCP lease time:-
The time that a client may use the assigned address. The client will try to renew this address after a half of this time and will request a new address after time limit expires.
No comments:
Post a Comment